Water & Wastewater Treatment Equipment Serving Jacksonville, FL
Precision lime slaking, biosolids stabilization, drying, storage, and truck loading systems engineered by RDP Technologies for Jacksonville and Northeast Florida municipal facilities.
Trusted Process Equipment for Jacksonville Water & Wastewater Plants
For over 45 years, RDP Technologies has been building robust equipment, backed by dependable process performance, based upon a foundation of practical technologies that simply perform. Jacksonville-area utilities count on RDP for clean, accurate, reliable systems that are simple and easy to maintain.
Biosolids Storage & Precision Truck Loading Systems
JEA operates several large wastewater treatment plants across Jacksonville and Duval County, anchored by the Buckman Water Reclamation Facility, the District II Water Reclamation Facility, and the Southwest Water Reclamation Facility. As one of the largest community-owned utilities in the United States, JEA manages substantial daily biosolids volumes serving more than 900,000 residents across Duval, St. Johns, Nassau, and Clay counties. Material moves to land application and beneficial reuse outlets across North Florida and South Georgia. Reliable storage and loadout equipment is essential to keeping that program running through hurricane season, intense summer humidity, and the routine operational realities of a coastal metro. RDP Technologies engineers biosolids storage systems and precision truck loading systems that automate the full flow from dewatering through to the departing truck.
Moving floor technology built into live bottom bin storage keeps sticky sludge cake flowing reliably through North Florida’s year-round humidity and heat, eliminating the bridging and rat-holing common to conventional steep-walled hoppers. Sludge cake truck loading runs automatically through the precision truck loading system, with most loads completed within minutes and held to within a couple hundred pounds of the operator’s target weight.
Three decades and approximately three hundred biosolids conveying equipment installations have refined a layout that keeps trucks clean, departure times predictable, and operator involvement minimal at the bay. Because the cycle runs without continuous attendance, Jacksonville-area plant staff can redirect labor toward higher-value work elsewhere in the facility. For utilities managing hurricane preparation, recovery operations, and routine hauler rotations to land application sites across the region, that automation directly improves daily throughput and operational resilience.
Biosolids Lime Stabilization & Pasteurization Solutions in Jacksonville, FL
Florida’s 2020 Clean Waterways Act significantly tightened biosolids land application requirements statewide, and the resulting county-level restrictions across parts of Florida have reshaped where Northeast Florida biosolids can be applied. JEA and surrounding Northeast Florida utilities operate under sustained pressure to evaluate Class A pathways for broader market flexibility. RDP Technologies has been delivering EPA 503 compliant lime-based solutions since the federal rules were first established, supporting both Class A biosolids treatment and Class B biosolids stabilization at facilities across Florida.
The EnVessel Pasteurization biosolids pasteurization system is one of the most widely deployed Class A processes nationally, with more than 70 installations operating across the United States. EnVessel pairs lime addition with controlled supplemental heat instead of relying on heavy lime overdosing, keeping chemical demand reasonable while reliably hitting the time, temperature, and pH thresholds required for full pathogen kill.
Enhanced Pasteurization moves the cycle into a sealed sequencing batch reactor where lime drives pH above 12 and controlled heating completes disinfection. Both pathways serve as proven wastewater pathogen reduction equipment, supported by published case studies and decades of operational data from municipalities nationwide. For Jacksonville-area facilities planning capital upgrades against the Clean Waterways Act, county-level restrictions, and tightening FDEP requirements, these are regulator-recognized options with strong long-term track records.
Lime Slaking & Feed Systems for Jacksonville Water Treatment Facilities
JEA operates one of the country’s largest groundwater-based drinking water systems, drawing essentially all of its supply from the Floridan Aquifer through dozens of wells distributed across the Jacksonville service area, treating that water at facilities including the Main Street, Ridenour, and Brierwood water treatment plants. The naturally hard groundwater requires careful pH adjustment, corrosion control, and management of hydrogen sulfide and other dissolved constituents typical of Floridan Aquifer source water. RDP Technologies designs lime slaking and feed systems engineered for the precision and reliability that high-volume Florida municipal operations require year-round.
The Tekkem family of lime slakers for water treatment applies load cell technology to combine a measured weight of quicklime with a measured weight of water, holding the slaking reaction within the proven 180°F to 190°F temperature window. This weight-based control approach enables precision lime dosing systems with slurry concentration adjustable from one percent up to thirty percent based on plant requirements.
The same Tekkem platform converts to operate as a hydrated lime feed system without any physical modifications, providing flexibility as lime market conditions shift across Florida and the broader Southeast. A continuous slurry delivery loop combined with pinch valve and flow meter dosing supports accurate feed at multiple application points within a facility. With only one moving part inside the reaction tank, maintenance demands stay infrequent and predictable for plants running around the clock through Florida’s year-round operating intensity.
Custom Engineering & Process Equipment Support Serving Jacksonville
Water and wastewater infrastructure across the Jacksonville metro region operates under the operational realities of one of the largest geographic cities in the country by area, with Duval County’s consolidated city-county footprint and a sprawling service territory along the St. Johns River corridor. Plants here must handle hurricane events, heavy summer rainfall, and the long-term planning demands of serving a major Atlantic port and logistics hub. RDP Technologies brings over 45 years of custom process equipment engineering experience to capital projects across Duval, St. Johns, Nassau, Clay, and surrounding North Florida counties.
As a wastewater treatment equipment manufacturer that handles design, fabrication, and controls programming under one roof, we adapt to existing tankage, constrained site footprints, and operator workflows rather than forcing a generic package into a difficult location. Our intelligent control platforms integrate cleanly with SCADA systems and meet the detailed reporting expectations of Florida DEP, St. Johns River Water Management District coordination, and EPA Region 4 oversight.
We engage directly with municipal engineers, consulting firms, and plant operations staff from early scoping through commissioning and long-term technical support. Robust equipment, dependable process performance, and practical technologies that simply perform are the principles that have guided every project we deliver. Jacksonville-area facilities benefit from working with a single accountable manufacturer that designs, builds, and stands behind the equipment for the long haul.
Biosolids Drying Systems for Jacksonville Wastewater Plants
As Florida counties continue tightening Class B land application restrictions and Jacksonville-area biosolids hauling logistics evolve across Northeast Florida, biosolids drying systems offer a strategic capital investment for cutting hauling tonnage and unlocking higher-value beneficial reuse markets. The RDP-Fenton wastewater sludge dryer operates on a repeating batch cycle that allows drying time to be adjusted to match the natural variation in sludge cake solids concentration coming off the dewatering line.
Batch sludge drying equipment handles those upstream variations cleanly, whereas continuous-flow dryers often struggle when feed quality shifts unexpectedly. Operators in the field have repeatedly noted how little daily attention the system requires once a stable recipe is dialed in.
The dried product comes out significantly reduced in volume and weight, lowering trucking costs and opening pathways into fertilizer, soil amendment, and energy recovery markets across Florida, Georgia, and the broader Southeast region. Pairing the dryer with upstream RDP lime feed or storage equipment gives Jacksonville wastewater plants a fully integrated biosolids handling line backed by a single manufacturer with consistent controls and ongoing support. Long service life and ease of operation were the design priorities from the start, and that focus shows up clearly in real-world performance data from installed sites across the country.
Ready to Discuss Your Jacksonville Project?
Connect with the RDP Technologies team to scope lime feed, biosolids, or drying equipment for your Jacksonville-area facility. We’re ready to help.