Water & Wastewater Treatment Equipment Serving Boise, ID
Precision lime feed, biosolids stabilization, drying, storage, and truck loading systems engineered by RDP Technologies for Boise-area municipal facilities.
Trusted Process Equipment for Boise Water & Wastewater Plants
For over forty years RDP Technologies has produced equipment that stays sturdy, keeps running, and stands on down-to-earth technology built to perform. Plants across Idaho's Treasure Valley count on RDP for accurate, long-lasting systems that ask little of the people running them.
Custom Engineering & Process Equipment Support Serving Boise
Boise is among the fastest-growing metros in the West, and the city's Water Renewal Utility Plan is pouring money into its Lander Street and West Boise facilities to keep pace. Capital programs of that size suit RDP Technologies, which backs the work with a custom process equipment engineering record running better than four decades, brought to the plants the city operates.
Because every step from design to fabrication stays in-house, RDP can fit a system to a plant's real tanks, narrow spaces, and daily routines instead of dropping in a catalog unit. Its controls link into SCADA and turn out the records Idaho DEQ and EPA Region 10 require at permitted sites in Idaho.
RDP stays with a project from early design through fabrication, startup, and the long service stretch that follows, alongside the city's engineers, its consultants, and the operators on the plant floor. RDP's aim is the same as ever: equipment made to last, performance crews can trust, and engineering grounded enough to prove out on the floor. Whether it's a single feed skid or a full biosolids line, Boise plants deal with one shop that answers for the result from startup forward.
Browse Technical Resources
Biosolids Storage & Precision Truck Loading Systems
Boise's Lander Street and West Boise water renewal facilities turn out biosolids on a day in and day out, and the loadout has to hold up through dry high-desert summers and hard mountain winters. RDP ties biosolids storage and precision truck loading into one motion, so the cake moves from dewatering to the trailer with no hands on it.
A moving floor set in each live bottom bin keeps wet, heavy cake sliding to the gate, so the cake won't bridge or rat-hole as it would in a smooth, steep-sided hopper. Once the bin feeds the precision truck loading system, loadout carries on untended, sludge cake truck loading carrying a trailer to full in minutes and the finished load landing a few hundred pounds, at most, from the figure the operator keyed in.
Plenty of biosolids conveying equipment installs stand behind a loadout that clears trucks in and out fast with hardly a soul at the bay. Because loading handles itself, Boise crews can spend their hours on work that actually needs them. For plants pushing through stacked hauler days, that reliability turns into fewer delays and a smaller overtime line.
Explore Live Bottom Bins
Lime Slaking & Feed Systems for Boise Water Treatment Facilities
Veolia Water Idaho treats Boise River water and well supply at plants like Marden before sending it out across the Treasure Valley, and lime handles pH and corrosion control along the way. Getting that dose right is what keeps the finished water stable, and RDP develops lime slaking systems and lime feed systems dependable enough for that duty.
Boise's Tekkem lime slakers for water treatment draw on load cells to weigh quicklime and water before they react, keeping the slaking reaction in its most stable range. Measuring by weight is what makes precision lime dosing systems reliable, so the plant can hold slurry strength to just what pH and corrosion control ask for. Even river water off snowmelt shifts through the year, and steady feed keeps treated water on target.
Nothing has to be swapped for the same Tekkem rig to carry on as a hydrated lime feed system, so Boise can adjust as lime supply and pricing move. A recirculating loop with metered valves keeps feed accurate at each spot it serves. The reaction tank runs on a lone moving part, keeping maintenance minimal and easy to budget, even where a plant never shuts down.
See the Tekkem Slaker
Biosolids Lime Stabilization & Pasteurization Solutions in Boise, ID
The Lower Boise River carries strict phosphorus limits, and the rules built around them hold the area's biosolids work to close pathogen and nutrient control. RDP Technologies has delivered lime-based treatment since the early 503-rule era, and the RDP biosolids lime stabilization line serves both grades: Class B biosolids cleared for land application, or the cleaner Class A biosolids treatment when a project calls for it.
EnVessel Pasteurization is among the most common Class A processes in use nationwide, with upward of 70 now in place. Rather than over-liming, it joins a measured lime dose to heat, taking time, temperature, and pH to the point where pathogens die off, all on modest reagent.
Where everything has to stay contained, Enhanced Pasteurization holds the process in a sealed reactor, sending pH past 12 while controlled heat closes out the kill. Both stand as trusted wastewater pathogen reduction equipment, backed by a deep list of installs and real operating results. For Boise plants planning capital work, each is a path Idaho DEQ and EPA have long supported.
View EnVessel Pasteurization
Biosolids Drying Systems for Boise Wastewater Plants
Trucking biosolids out of the Treasure Valley adds up over the miles, so taking water out at the plant is what makes biosolids drying systems worth it for Boise. The RDP-Fenton wastewater sludge dryer works through one batch at a time, letting an operator tune each run to the cake solids dewatering hands off rather than a single fixed setting.
Batch sludge drying equipment takes those shifts in stride, where continuous units often falter as the incoming feed moves around. Operators say it needs little minding once a solid recipe is set, which lets the crew move on to everything else on the floor.
What the dryer puts out is far lighter and much less bulky, trimming haul cost and opening reuse as fertilizer, in soil blending, and for energy recovery around Idaho and the wider Northwest. Placed at the tail of the RDP line, the dryer takes its cues from the same control panel the lime feed and storage equipment ahead of it use, with one supplier behind the whole chain. The design grew out of two goals, simple operation and years of dependable service, and the results from working sites bear that out.
Learn About Fenton Drying
Ready to Discuss Your Boise Project?
Is there a lime feed, biosolids, or drying job in the pipeline at a Boise plant? RDP Technologies can talk it over and outline a path forward.